Anybus® Communicator™ solves your devices' connectivity problems

Nearly all machines and devices in operation today have a serial or CAN based RS-232/422/485 interface. Most of them perform well, but lack an interface to fieldbus or industrial Ethernet. 

This is where the Anybus Communicator gateway comes in.

It takes your existing device as is and enables it to be connected to an industrial PLC control system without any hardware changes or programming.

Retro-fit existing devices

Avoid unnecessary investment by prolonging the life of a well-performing serial or CAN-based device. By using the Anybus Communicator, you can connect it to any fieldbus or Industrial Ethernet network. 

Avoid hardware or software changes

The Anybus Communicator connects your device as is.. No hardware or software changes are required for your connected device. All data/protocol conversion is made, and mapped, to the network from inside the Anybus Communicator.

Easily convert your devices' serial/CAN protocol

The flexibility of the Anybus Communicator means that you can convert almost any RS-232/422/485 Request/Response or Produce/Consume protocol — Modbus RTU, ASCII, DF1, CAN-based, or user-specific. The Communicator requires no PLC function blocks or any programming. Just connect, configure and you're done.

Get an inexpensive network connection

With just ONE Anybus Communicator you can connect up to 31 nodes/devices in a multi-drop scenario by selecting RS-485. This allows for a very inexpensive fieldbus/Ethernet connection for your devices. 

Connect slow serial devices without affecting performance

The Anybus Communicator internally stores and intelligently maps I/O data. This de-couples the upper fieldbus/Ethernet network and the slower serial/CAN sub-network. This means that devices with slow serial communication can be integrated into high-speed fieldbus/Ethernet networks without any restrictions to the upper network performance.

Simplify your network infrastructure

As an "in-chassis" alternative, you can mount the Anybus Communicator on a DIN-rail close the